吊鉤安全檢驗及報廢標準

- 2021-08-03-

安全檢查
1. The 鉤 used in the lifting mechanism driven by manpower is tested with 1.5 times the rated load as the inspection load.
2. The 鉤 used for the power-driven lifting mechanism shall be tested with 2 times the rated load as the inspection load.
3. 之後從檢驗載荷中取出,應無明顯缺陷或變形,開口度增加不應超過原尺寸的0.25%。

4. 對於鉤s that have passed the inspection, a mark should be printed in the low-stress area of the 鉤, including the rated lifting weight, factory mark or factory name, inspection mark, production number, etc.

廢鋼標準鉤s
出現下列情況之一時應報廢:
─ 裂紋;
②危險斷面磨損達到原尺寸的10%;
③開口度比原尺寸增加15%;
④The torsion deformation of the 鉤 body exceeds 10°;
⑤The dangerous section of the 鉤 or the neck of the 鉤 is plastically deformed;
⑥The 鉤 thread is corroded;
⑦When the wear of the 鉤 bushing reaches 50% of the original size, the bushing should be replaced;
⑧ 當工件的心軸磨損到原始尺寸的 5%,應更換芯軸。